Eden Nemesis Silver Series NA80 User Manual download pdf (Page 5)

position. This will set your amplifier up flat and with the auto compressor

operating. Next, plug in the power cord to the AC inlet on the back of the

unit. Use only a safe grounded receptacle for proper

operation at the

correct voltage for your country. Double check to make certain your

amplifier is set for the correct voltage in your country.

Once you’ve completed the steps above, you can plug in your bass and

turn on the unit. Turn the master up until you reach a comfortable sound

level and we will go through the tone controls and other features.

OPERATION & DESCRIPTION of CONTROLS

INPUT JACKS

The input jacks on both channels will accept most bass guitar output

levels. If you have a dual-battery bass with output in excess of +10dB,

you will probably have to turn the output of your bass down to avoid

clipping the input. The jacks will accept most passive and active basses.

The aux jack will accept RCA connectors so you can connect a CD or

tape player.

LEVEL CONTROL Aux Channel

This control regulates the aux channel and controls, the level sent to the

output master gain control. You can use this channel to plug in a second

instrument or a CD/tape player – a great feature for students and

teachers. For most applications, you should set the control between 9:00

and 3:00 to match your instrument and playing style to the amplifier. The

CD/tape player inputs are RCA-style inputs.

TONE CONTROL Aux Channel

This is a tone balance control. It shifts both high and low frequencies at

the same time. It acts rather like an audio teeter-totter. It allows a quick

EQ of the entire audio spectrum on one control, and is highly effective

for matching different recording formats and balancing instruments.

GAIN CONTROL Main Channel

1 2 3 4 5 6 7 8 9 10 11

No comments

Eden Nemesis Silver Series NA80 User Manual Page 5